The electrolytic cell is a photoelectrochemical cell

The electrolytic cell window uses quartz glass, and the light transmittance is more than 95%

Non-standard samples can be used for working electrode of electrolytic cell, but it is necessary to cover holes of a fixed area

The electrolytic cell has a fixed area of 1 square centimeter and can also be customized

The electrolytic cell is pressed against working sample by screwing in the back screw, and the fixed area hole is pressed by the working electrode to achieve the sealing of cell body

The standard area of the electrolytic cell is 1 square centimeter, or it can be customized according to the requirements

The auxiliary electrode and reference electrode of the electrolytic cell must be customized to match it with this electrolytic cell.

The electrode part of the electrolytic cell realizes the internal insertion and extraction of the electrode through the earphone jack on the cover, so that the electrode system is absolutely sealed.

The cell body material is PTFE

The electrolytic cell is often used in the three-electrode system.

The volume of the electrolytic cell ranges from 30ml to 500ml, and can also be customized according to requirements.

The cell part of the electrolytic cell is designed with an external screw port, and the inner core of the cover adopts PTFE rotating 360 degrees, so that the electrode accurately corresponds to the channel (generally the electrode is parallel to the light window), and the outer PTFE cover is tightened seal it.

The electrolytic cell is equipped with an aeration device that can be ventilated under the liquid surface, and the atmosphere is conducted according to different experiments.

The electrolytic cell can add a sampling port on the cell body, in which case additional costs are required.

The quartz plate of the electrolytic cell is removable and can be quickly replaced