The working electrode, auxiliary electrode and reference electrode of electrolytic cell can be matched as required, and the electrodes must be extended

The cell body material is PTFE

The electrolytic cell is often used in the three-electrode system.

The volume of electrolytic cell ranges from 30ml to 500ml, and can also be customized according to requirements.

The electrolytic cell is a relatively sealed electrolytic cell system.

The cathode chamber (working electrode) and the anode chamber (comparative electrode) are separated by an ion membrane (user-supplied).

The two chambers are sealed with nails to facilitate the replacement of the diaphragm and reference electrode. It is in the same room as the working electrode to effectively reduce the R drop.

The sealing part of the cell body of the electrolytic cell is designed with an external screw port, and the inner core part adopts 360 degree rotating polytetrafluoroethylene, so that the electrode accurately corresponds to the light window and is sealed by tightening the outer cover

The electrode part of the electrolytic cell is sealed on the PTFE plug, and the sealing effect is achieved by pressing the O ring with the sealing screw

The electrolytic cell is equipped with an aeration device that can be ventilated under the liquid surface, and different shapes of aeration devices are selected for the atmosphere according to different experiments.

For example, straight type aeration for carbon reduction and L type aeration for nitrogen reduction.

The electrolytic cell can add a sampling port on the cell body, in which case additional costs are required.

The electrolytic cell is a relatively sealed system.

If an absolute sealing method is required, a valve needs to be added on the lid of the electrolytic cell. Please refer to C027-2.

The quartz plate of the electrolytic cell can be quickly disassembled and replaced