The electrolytic cell is upgraded on the basis of C008-10, adding a light window

The working electrode, auxiliary electrode and reference electrode of electrolytic cell can be matched as required, and electrodes must be extended

The cell body of electrolytic cell is made of high borosilicate glass, and single-layer cell body has an overhead layer design, which can effectively eliminate the hidden solution

The electrolytic cell is often used in the three-electrode system, the volume of electrolytic cell is 10ml

The electrolytic cell is divided into two types of relatively sealed and absoluted sealed electrolytic cell systems.

The cathode chamber (working electrode) and the anode chamber (comparative electrode) are separated by an ion membrane (user-supplied).

The two chambers are sealed and linked by a chain for easy replacement. The diaphragm, reference electrode and working electrode are in the same room, effectively reducing the R drop.

The glass sealing part of electrolytic cell is designed with an internal thread, and sealing effect is achieved by tightening PTFE and squeezing the sealing ring.

The relative sealing of electrode part of the electrolytic cell is achieved on the PTFE plug, and sealing effect is achieved by squeezing the O ring with the sealing screw

The absolute sealing of electrode part of electrolytic cell is to realize the internal insertion and extraction of electrode through the headphone jack on the PTFE cover, so that the electrode system is absolutely sealed.

The electrolytic cell is equipped with an aeration device that can be ventilated under the liquid surface, and the atmosphere is conducted according to different experiments.

The electrolytic cell can add a sampling port on the cell body, in which case additional costs are required.

No valve can be added to the electrolytic cell.

All absolute seals are realized by quick-connect.

The diameter of the PTFE tube used for quick-connect is 3mm.