The cell body material of electrolytic cell is high borosilicate glass

The light window of electrolytic cell uses quartz, the light transmittance is greater than 95%,

The light window part of electrolytic cell and cell body are connected by a lock ring to ensure sealing, and the quartz light window can be replaced quickly and conveniently.

The electrolytic cell is often used in the three-electrode system.

The volume of electrolytic cell ranges from 30ml to 500ml, and can also be customized according to requirements.

The working electrode, auxiliary electrode and reference electrode of electrolytic cell can be matched as required, and the electrodes must be extended

The electrolytic cell is a relatively sealed electrolytic cell system,

The glass sealing part of electrolytic cell is designed with an external screw port, and inner core adopts PTFE rotating 360 degrees, so that  electrode accurately corresponds to the light window, and is sealed by tightening the outer cover of POM material.

The electrode part of electrolytic cell is sealed on PTFE plug, and the sealing effect is achieved by pressing the O ring with the sealing screw

The electrolytic cell is equipped with an aeration device that can be ventilated under the liquid surface, and atmosphere is conducted according to different experiments.

The electrolytic cell can add a sampling port on cell body, in which case additional costs are required.

The electrolytic cell is a relatively sealed system.

If an absolute sealing method is required, a valve needs to be added on lid of  electrolytic cell. Please refer to C019-2 model.

The electrolytic cell is divided into single-layer and double-layer forms

The double layer adds a constant temperature water bath function on the basis of a single layer. By continuously passing circulating constant temperature water in the jacket layer of the electrolytic cell, the measured solution in electrolytic cell reaches to constant temperature effect.