The main material of electrolytic cell is high borosilicate glass.

The working electrode sheet operated by electrolytic cell is a sheet-shaped working electrode, and sample installation is simple and convenient, easy to disassemble, and easy to handle.

The electrolytic cell can be used for electrochemical experiment of sample before electron microscope scanning, or for corrosion performance test of coating during corrosion test.

The bottom of electrolytic cell has a circular hole with a fixed area of 1 square centimeter (the required size can be customized according to requirements), and an O ring that can be sealed

After placing the sample in the round hole, tighten four screws on top of cell body by adjusting and tightening working sample to achieve the sealing effect.

The conductive link of working electrode of electrolytic cell adopts principle of adhesion of copper tape and working sample to conduct sample conduction.

Copper tape is easy to use, easy to replace after corrosion, and can better ensure conductivity.

The electrolytic cell is divided into single-layer and double-layer forms

The double layer adds constant temperature water bath function on basis of single layer.

By continuously passing circulating constant temperature water into the jacket layer of electrolytic cell, the inside of electrolytic cell can achieve a constant temperature effect.

Electrolytic cell cover material:  PTFE, the size of the cover varies according to the volume of the electrolytic cell.

Copper tape: need to be purchased separately